MCookie-Hub

From Microduino Wiki
Revision as of 02:02, 18 March 2016 by Admin (talk) (Specification)
Jump to: navigation, search
Language: English  • 中文
MCookie-Hub-rect.jpg

mCookie-Hub is designed for ease of the connection between Microduino Sensor Series and the core modules on the UPIN27 base board as well as further extended experiment.






Features

  • Integrate twelve sensor interfaces;
  • Small size with sensor interface integrated on the Upin 27 base board;
  • All function pins are extended;
  • Prevent reverse sensor connection;

Specification

  • All mCookie function pins are connected to the base board of the Hub, including digits, analog, serial port and IIC interface.
  • Hub's interface rules: GND, VCC, signal 1 and signal 2.
  • Two IIC interfaces.
  • Pin Description:

Sensor interface rules: GND, VCC, signal 1 and signal 2 '' or GND, VCC, signal 1 and NC(empty) Hub interface rules: GND, VCC, signal 1 and signal 2 '.

  • Such as:
    • Photosensitive sensor interface rules: GND, VCC, signal 1 and NC(empty). Since it is analog sensor, you can detect(A0-A7) by analog port. Seen from the picture, the hub can be connected to the location of 10, 11 and 12, and the corresponding pins areA6,A2 and A0.
    • Since the temperature and humidity sensor uses IIC interface, we can connect it to "1" or "2".
MCookie-sensorhub rule.JPG

Document

Development

  • Stack with Microduino core modules and have an external connection with Microduino sensors. Select the right interface according to different sensors.
    • Sensors adopting analog port:

Microduino-Sound,[[Microduino-Light],Microduino-Joystick,Microduino-Moisture,Microduino-Water line

Project

Purchase

History

Pictures

MCookie-sensorhub -F.JPG
MCookie-sensorhub -b.JPG

Video