MCookie-Hub

From Microduino Wiki
Revision as of 09:48, 24 August 2016 by Fengfeng (talk) (Development)
Jump to: navigation, search
Language: English  • 中文
MCookie-Hub-rect.jpg

mCookie-Hub is designed for ease of the connection between Microduino Sensor Series and the core modules on the UPIN27 base board as well as further extended experiment.






Features

  • Integrate twelve sensor interfaces;
  • Small size with sensor interface integrated on the Upin 27 base board;
  • All function pins are extended;
  • Prevent reverse sensor connection;

Specification

  • All mCookie function pins are connected to the base board of the Hub, including digits, analog, serial port and IIC interface.
  • Hub's interface rules: GND, VCC, signal 1 and signal 2.
  • Two IIC interfaces.
  • Pin Description:

Sensor interface rules: GND, VCC, signal 1 and signal 2 or GND, VCC, signal 1 and NC(empty). Hub interface rules: GND, VCC, signal 1 and signal 2 .

  • Such as:
    • Photosensitive sensor interface rules: GND, VCC, signal 1 and NC(empty). Since it is analog sensor, you can detect(A0-A7) by analog port. Seen from the picture, the hub can be connected to the location of 10, 11 and 12, and the corresponding pins areA6,A2 and A0.
    • Since the temperature and humidity sensor uses IIC interface, we can connect it to "1" or "2".
MCookie-sensorhub rule.JPG

Document

Development

Project

Purchase

History

Pictures

MCookie-sensorhub -F.JPG
MCookie-sensorhub -b.JPG

Video