Sensor-IO Split

Language:	English  • 中文

Sensor-IO split The product number of Sensor-IO Split is: MSDE21 Sensor-IO-split can split a 4PIN interface into 2. Introduction of Pins Pins of the sensor: PIN1: GND PIN2: VCC General signal pins: PIN3(IO1): digital/analog signal PIN4(IO2): NC(null) Special signal pins: If it is IIC: IO1/IO2 are respectively SDA/SCL. If it is soft serial port: IO1/IO2 are respectively tx/rx. Special to Sensor-IO Split sensor pins PIN1: GND PIN2: VCC PIN3(IO1): IO1 PIN4(IO2): IO2 Microduino sensor can communicate with core module through the connection with Microduino-Module Sensor Hub. All interfaces of Sensor-IO Split are 1.27mm-spacing 4Pin. After connect the IN interface to one interface of SensorHub, the extended “A port” is corresponding to the “even pins” of SensorHub, and the “B interface” is corresponding to the “odd pins” of SensorHub. For example, connecting to the 6/7 pin of Hub, the corresponding pin of A is 6/7, and the corresponding pin of B is 7. Document Schematic diagram: File:Sensor IO-split.Zip Application It can be used to divide the two IO signals of one 4PIN port in Sensorhub into two 4PIN ports. Purchase Gallery File:Sensor-IO split-F.JPG Sensor-IO split Front File:Sensor-IO split -b.JPG Sensor-IO split Back