Infrared Signal Receiving

From Microduino Wiki
Revision as of 03:36, 24 March 2016 by Admin (talk) (→‎Function of the Module)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Function of the Module

Overview

To use the IR receiving sensor to receive infrared signals and check data in the serial monitor.

Bill of Material

  • Module
Module Number Function
mCookie-CoreUSB 1 Core board
mCookie-Hub 1 Sensor pin board
Microduino-IR Receiver 1 Infrared receiving.
  • Other Hardware Equipment
    • One USB cable
    • One sensor cable
600px

Hardware Buildup

Setup 1：Connect the port of the sensor with D10 port of the Hub.

600px
  • Setup 2：Connect the CoreUSB, Hub and IR Receiver together to the computer with a USB cable.
600px

Mixly Programming

Debugging

Extension

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Infrared_Signal_Receiving&oldid=13408"