Timed Feeder

From Microduino Wiki
Revision as of 07:46, 19 January 2017 by Zhangfengfeng (talk) (Created page with "{| style="width: 1000px;" |- | ==Overview== 600px|center Design a timed feeder, which can feed your pet regularly when you are out. <br> Su...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

Anywhere timing-food.jpg

Design a timed feeder, which can feed your pet regularly when you are out.
Suitable kits: mCookie202, mCookie302


Module Bill

Module

Module Number Function
mCookie-Core 1 Core board
Battery box 1 Program download and power supply
mCookie-Hub 1 Sensor adapter plate
Joystick 1 Equal to a game Joystick, which can control the input
Line Finder 2 Detect the objectives
Servo 1 Servo
Servo Connector 1 Servo Connector

Other Equipment

  • USB cable*1
  • Sensor cable*3
  • Sensor shell
  • Lego or other fixation structures
Anywhere timing-food-module.jpg

Module Setup

Assembly

Anywhere timing-food-step.jpg
  • Assemble the modules and sensors together:
    • Connect the servo connector to pin 6/7 of Hub;
    • Connect the servo to pin 1 (the below three pins) of servo connector;
    • Connect Line Finder to pin A0/A1 of Hub;
    • Connect the Joystick to pin A2/A3 of Hub;
    • Insert one end of USB cable into the battery base, and connect the other to computer.

Programming

Required Program Blocks

Programming Thought

Open the cap, wait for putting food into it, press the Joystick, and then close the cap. Start timing, after the time is over, and finding the pet is approaching through the Line Finder, open the cap automatically, so that the pet can access to the food.

Mixly-ctrl-timing-food.jpg

Start to Program

1. Open the cap, and put food into it. Wait for the Joystick to be pressed, and then close the cap. Start to time.
Servo rotates to 180 degrees (open the cap and put food into it). Wait for the Joystick to be pressed. Servo rotates to 90 degrees (close the cap). Timer1 starts to work.

Mixly-ctrl-timing-food-code.jpg

2. After the time is over, and Line Finder finds the pet is approaching, it will open the cap automatically.
Wait for timer1 to be larger than 5s. Wait for the Line Finder to find the pet is approaching. Servo rotates to 180 degrees (after the time is over, the pet can get the food if approaching).

Mixly-ctrl-timing-food-code1.jpg


Test the result
After the program is uploaded, and the servo rotates to 180 degrees, press the Joystick and the servo will rotate to 90 degrees. If the pet approaches to the Line Finder after 5s, the servo will rotate to 180 degrees.

Anywhere timing-food.jpg



Q: The current feeder can not let the pet know when is a meal served. Can an indicator be designed for it which the pet can understand?
A: Install a red LED to the automatic feeder, the red led on which can get off gradually with the coming of the meal time.

Add feeding indication with a color LED
Variable LIGHT is for recording the brightness of LED.

Mixly-ctrl-timing-food-code2.jpg

If timer1 is less than 5s, execute repeatedly. Map timer1 from 0-5000 to 100-0, and save it into LIGHT. The red brightness is LIGHT (with the coming of the meal time, the red LED will go off gradually.

Mixly-ctrl-timing-food-code3.jpg

Technical Specification

Related Cases

Q&A