Introduction to Mixly

Mixly

This guide provides an introduction to Mixly. A drag and drop programming software (IDE) for Microduino and Arduino boards.

Setup

Please follow the setup guide for Mixly before proceeding the rest of this guide.

Mixly: Getting Started

Interface Layout

• Open Mixly by opening the mixly.jar.

• Section A. - Blocks.
• Section B. - Workspace.
• Section C. - Console.
• Section D. - File Options.
• 1. Undo - Reverts the last change.
• 2. Redo - Reverts the last undo.
• 3. Language Selection - Select the language of Mixly. Select-able languages are English, Spanish & Chinese
• 4. Code Preview - Opens a panel which shows the generated code from the Workspace blocks.
• 5. Zoom Reset - Resets the zoom to the default level.
• 6. Zoom In - Zoom in on the Workspace.
• 7. Zoom Out - Zoom out on the Workspace.
• 8. Trash Bin - Drag to the trash bin to delete blocks from the Workspace.
• 9. Upload Code - Compiles and uploads the code generated from the Workspace.
• 10. Compile Code - Compiles the code generated from the Workspace, but DOESN'T upload the code. Used to test if the code compiles without uploading it to a Core module afterwards.
• 11. Board Selection - Select the type of Core module/Arduino from this drop down menu that will be programmed.
• 12. COM Port Selection - Select the COM Port that the Core module/Arduino is connected to.
• 13. Serial Monitor - Opens the serial monitor that is used to send and receive data from the Core module/Arduino.
• 14. Test Hardware - Uploads a program to the attached board and tests to see if it is functional.
• 15. Interface Size - Scales the size of the interface of Mixly.

Blocks

Blocks are the pieces used to create code in Mixly. The blocks connects to each other if compatible. Incompatible blocks will not fit together. A program in Mixly is the collection of several blocks configured to perform a duty.

There are various types of blocks sorted into different categories. These include:

Category	Description
In / Out	Blocks that controls the analog / digital pins on the Core module (or Arduino) boards.
Control
Math
Text
Lists
Logic
SerialPort
Communicate
Storage
Sensor
Actuator
Ethernet
Variables
Functions
Factory