States and actions of switches

Sensor_Key Library-Samples of Switches’ States and Actions In the following samples, Cores are used to detect digital, analog, and virtual switches’ [release] and [press] actions and states. Required Hardware mCookie-Core mCookie-Battery mCookie-Hub Sensor-Crash Circuit Assembly Connect Crash to pin A0/A1 of Hub. Stack Battery, Core and Hub together. Connect them to computer with the MicroUSB cable. For initial use, please refer to: Getting Started Code Identify analog sensors [long press] and [short press] actions within corresponding sections. #include <Microduino_Key.h> AnalogKey keyAnalog(A0); void setup() { Serial.begin(9600); keyAnalog.begin(INPUT); } void loop() { switch (keyAnalog.readVal(0, 50)) { //(analog minimum, analog maximum) case KEY_RELEASED: Serial.println("KEY (analog) RELEASED---1"); //Released state of the switch break; case KEY_PRESSED: Serial.println("KEY (analog) PRESSED-------2"); //Pressed state of the switch break; case KEY_PRESSING: Serial.println("KEY (analog) PRESSING--------3"); //Pressing action break; case KEY_RELEASING: Serial.println("KEY (analog) RELEASING---------4"); //Releasing action break; } delay(100); } Identify [long press] and [short press] actions of digital sensors within corresponding sections. #include <Microduino_Key.h> DigitalKey keyDigital(A0); void setup() { Serial.begin(9600); keyDigital.begin(INPUT_PULLUP); } void loop() { switch (keyDigital.readVal()) { case KEY_RELEASED: Serial.println("KEY (digital) RELEASED---1"); //Released state break; case KEY_PRESSED: Serial.println("KEY (digital) PRESSED-------2"); //Pressed state break; case KEY_PRESSING: Serial.println("KEY (digital) PRESSING--------3"); //Pressing action break; case KEY_RELEASING: Serial.println("KEY (digital) RELEASING---------4"); //Releasing action break; } delay(100); } Identify the [long press] and [short press] actions of virtual switches’ corresponding states. #include <Microduino_Key.h> VirtualKey keyVirtual; void setup() { Serial.begin(9600); keyVirtual.begin(); pinMode(A0, INPUT_PULLUP); } void loop() { bool val = !digitalRead(A0); //val any one bool variable switch (keyVirtual.readVal(val)) { case KEY_RELEASED: Serial.println("KEY (digital) RELEASED---1"); //Released state break; case KEY_PRESSED: Serial.println("KEY (digital) PRESSED-------2"); //Pressed state break; case KEY_PRESSING: Serial.println("KEY (digital) PRESSING--------3"); //Pressing action break; case KEY_RELEASING: Serial.println("KEY (digital) RELEASING---------4"); //Releasing action break; } delay(100); } Relative Cases Sensor_Key_Reference: Switches Control Library Short press and long press of switches: detect switches’ short press and long press.

Return to Sensor-Crash