Microduino-Module CoreSTM32

Language:	English  • 中文

Microduino- CoreSTM32 Microduino-CoreSTM32 is one of the core modules of Microduino, adopting ARM development board of STM32F103CBT6 chip. Microduino-CoreSTM32 is a open-source software, compatible with Maple Mini, and it can be used together with Microduino extension modules and other electronic components, modules, and sensors to make many funny interactive works. Features Small, stackable, and ecomomic Open source hardware circuit design and Arduino compatible programming development environment. Using the U-Shape 27-pin interface (UPin-27)--the standard interface of Microduino series Microduino- CoreSTM32 can work with Microduino-USBTTL and burn programs into the bootloader flexibly. With a uniform Microduino interface standard and rich peripheral modules, it can easily connect with other Microduino modules and sensors. 2.54mm (0.1 inch) pin pitch, compatible with bread boards and pegboards. Microduino- CoreSTM32 can work with Microduino-USBTTL and burn programs into the bootloader flexibly.

Specification Electrical Specification Microcontroller: STM32F103CBT6 Frequency: 72MHz Operation voltage: 5V Core voltage: 3.3V Flash: 128KB SRAM: 20KB Pin Specification Digital I/O pin: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14(A0),15(A1),16(A2),17(A3),18(SDA),19(SCL),20(A6),21(A7) Analog input pin: A0(ADC12_IN0), A1(ADC12_IN1), A2(ADC12_IN2), A3(ADC12_IN3), 10(ADC12_IN4), 13(ADC12_IN5), 12(ADC12_IN6), 11(ADC12_IN7), A6(ADC12_IN8), A7(ADC12_IN9) Serial port: Serial RX0 and TX1, used for receiving(RX) and sending(TX) TTL serial data. Serial1 D2(RX3)and D3(TX3), used for receiving(RX) and sending(TX) TTL serial data. Hardware PWM: 0, 1, 4, 11, 12, 14(A0), 15(A1), 16(A2), 17(A3), 18(SDA), 19(SCL), 20(A6), 21(A7) SPI: D10(SPI1_NSS), D11（SPI1_MOSI）, D12（SPI1_MISO), D13（SPI1_SCK); IIC: 18(SDA), 19(SCL); Each I/O port has interruption function. Microduino-Core STM-Pinout Microduino-Core STM-Pinout Microduino-Core STM-Pinout Documents Microduino- CoreSTM32 used components. MCU: STM32F103CBT6 Development Set up the Microduino-CoreSTM32 development environment Use the Maple IDE development environment: Microduino use the similar development environment with the Arduino IDE, so you can use the Maple IDE, Flash or Processing and so on. Combine with other Microduino module, you can finish more interesting projects. Download the program to Microduino-CoreSTM32, you must use the Microduino-USB2TTL module. Configure the Maple IDE, please refer to Microduino-CoreSTM32 Maple Drive Install Program for Microduino-CoreSTM32 Make sure installed the Microduino-CoreSTM32 derive Prepared hardware：Microduino-CoreSTM32, USB cable Prepared software：Maple IDE The beginning of Micoduino-CoreSTM32 Burn the Microduino- CoreSTM32 BootLoader If you got a Microduino-CoreSTM32 board without the bootloader, you have to use the Microduino-CoreUSB to burn the bootloader firstly, please refers to Use the Microduino-USBTTL to burn bootloader for Microduino- CoreSTM32. Applicaion Microduino CoreSTM32 Tutorial History Picture