Lesson 47--Microduino Audio Spectrum & Video Output

From Microduino Wiki
Revision as of 02:38, 12 May 2015 by 1304410487@qq.com (talk) (Created page with "{| style="width: 800px;" |- | ==Objective== This course will show you how to use Microduino to get sound signal and display audio spectrum via FFT(Fast Fourier Transform) on y...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Objective

This course will show you how to use Microduino to get sound signal and display audio spectrum via FFT(Fast Fourier Transform) on your TV.

Equipment


  • Other Hardware Equipment
Hardware needed Number Function
n3904 NPN triode One Used as an amplifier
1KΩ resistor One Current limit
330Ω resistor One Current limit
10KΩ resistor Two Current limit
100KΩ resistor Onr Current limit
2N3904 triode One Current limit
0.1uf capacitance Two Pass high frequency and stop low frequency
Breadboard One All components gather here
Breadboard jumper Several Connector
Electret microphone One Receive sound signal
AV interface displayer One Display spectrum
RCA wire One Video transmission line


Schematic

AudioSpectrumAnalyzerSchmetic1.png

Program

AudioSpectrumAnalyzer

Debugging

Step 1:

First, we need an electret microphone to build a device that can receive sound signal, as follows:

MicrophoneCircuit.png

Connect the output terminal to Microduino’s A0 port, you can use A0 output value to judge the circuit buildup.

Step 2:

Make RCA line, connect it to Microduino. For details, please refer to Microduino video output tutorial:

Microduino Video Output

Here is the well-built circuit:

MicrophonePhoto.png

Step 3: Download the code and run. Program functions in:

1. Read data off A0 port.

2. Cut data for some time and process it with FFT.

3. Display the well-processed data in the way of scetches and lines.

4. That cycle repeats

It is displayed as follows:

MicrophoneVideoOUt.png

Result

You’ll see audio spectrum on displayer.

Video=