Local Weather Station

Language:	English  • 中文

Objective To detect environment via a temperature & humidity sensor and light-sensitve senor, then display the data on OLED. Users can build a weather station and give yourself a real experiment of the "nature" around you. Principle Equipment Module Number Function Microduino-CoreUSB 1 Core board Microduino-Sensorhub 1 Sensor pin board Microduino-BM 1 Battery management Microduino-OLED 1 Display Microduino-DUO-V 1 Extension board Microduino-Temp&Hum 1 Temperature and humidity sensor Microduino-Light 1 Light-sensitive sensor Other Equipment: A battery File:Local weather station.jpg 600px Hardware Buildup Setup 1：Connect CoreUSB to the computer, open program examples, select the right board and serial port and then download the program. Setup 2：Stack all modules and use DUO-V as the extension board. Sensorhub and OLED can be only stacked on the top. File:Local weather station setup 1.jpg 600px Setup3：Connect temp&hum sensor to Sensorhub's A4 and A5 pins and the light-sensitive sensor to A0. File:Local weather station setup 2.jpg 800px Setup4：Connect the battery to BM. File:Local weather station bm.JPG 800px Software Debugging Function Description: " oled.h " controls the file displaying environment data. " weather.h " File of environment data acquired by the sensors. Calculate temp&hum and light values am2321.read(); sensor_tem = am2321.temperature / 10.0; sensor_hum = am2321.humidity / 10.0; sensor_light = map(analogRead(A0), 0, 1023, 0, 255); The led light on OLED goes on when temperature is above a certain value. if (sensor_tem > 30) { s_data = 1; digitalWrite(ledPin, HIGH); } else { s_data = 0; digitalWrite(ledPin, LOW); } Result Sensors can acquire temperature, humidity and light intensity data from the environment and display them on OLED. By changing the environment around you, you'll find corresponding change on the screen. For this project, you can get a beautiful shell with LEGO boards which can be easily stacked with mCookie. Video