Difference between revisions of "MCookie-Hub"

From Microduino Wiki
Jump to: navigation, search
(Specification)
(Pin Description)
Line 31: Line 31:
  
 
===Pin Description===  
 
===Pin Description===  
 +
Most sensors use the first signal (signal 1) when connecting to the sensor hub.
 +
 +
{| class="wikitable"
 +
|-
 +
!
 +
! PinOut A
 +
! PinOut B
 +
! PinOut C
 +
! PinOutD
 +
|-
 +
! Hub Header
 +
| GND
 +
| VCC
 +
| SIGNAL 1
 +
| SIGNAL 2
 +
|-
 +
! ST* Connector
 +
| GND
 +
| VCC
 +
| INPUT / OUTPUT
 +
| Not connected (usually)
 +
|}
 +
*ST = Sensor / Trinket Connector
 +
 
Sensor interface rules: '''GND, VCC, signal 1 and signal 2 ''' or '''GND, VCC, signal 1 and NC(empty)'''.  
 
Sensor interface rules: '''GND, VCC, signal 1 and signal 2 ''' or '''GND, VCC, signal 1 and NC(empty)'''.  
 
Hub interface rules: '''GND, VCC, signal 1 and signal 2 '''.  
 
Hub interface rules: '''GND, VCC, signal 1 and signal 2 '''.  

Revision as of 21:29, 29 March 2017

Language: English  • 中文
MCookie-Hub-rect.jpg

mCookie-Hub is designed for ease of the connection between Microduino Sensor Series and the core modules on the UPIN27 base board as well as further extended experiment.

The sensor / trinket connector are 4 pin, 1.25mm pitch JST connectors.






Features

  • Integrate twelve sensor interfaces;
  • Small size with sensor interface integrated on the Upin 27 base board;
  • All function pins are extended;
  • Prevent reverse sensor connection
  • Uses 4 pin, 1.25mm pitch JST headers

Specification

  • All mCookie function pins are connected to the base board of the Hub, including digital, analog, serial port and IIC interface.
  • Hub's interface pinout per header: GND, VCC, signal 1 and signal 2.
  • Two IIC interfaces.

Pin Description

Most sensors use the first signal (signal 1) when connecting to the sensor hub.

PinOut A PinOut B PinOut C PinOutD
Hub Header GND VCC SIGNAL 1 SIGNAL 2
ST* Connector GND VCC INPUT / OUTPUT Not connected (usually)
  • ST = Sensor / Trinket Connector

Sensor interface rules: GND, VCC, signal 1 and signal 2 or GND, VCC, signal 1 and NC(empty). Hub interface rules: GND, VCC, signal 1 and signal 2 .

  • Such as:
    • Photosensitive sensor interface rules: GND, VCC, signal 1 and NC(empty). Since it is analog sensor, you can detect(A0-A7) by analog port. Seen from the picture, the hub can be connected to the location of 10, 11 and 12, and the corresponding pins are A6, A2 and A0.
    • Since the temperature and humidity sensor uses IIC interface, we can connect it to "1" or "2".
MCookie-sensorhub rule.JPG

Document

Development

Project

Purchase

History

Pictures

MCookie-sensorhub -F.JPG
MCookie-sensorhub -b.JPG

Video