MCookie-Hub

Language:	English  • 中文

mCookie-Hub is designed for ease of the connection between Microduino Sensor Series and the core modules on the UPIN27 base board as well as further extended experiment. Features Integrate twelve sensor interfaces; Small size with sensor interface integrated on the Upin 27 base board; All function pins are extended; Prevent reverse sensor connection; Specification All mCookie function pins are connected to the base board of the Hub, including digits, analog, serial port and IIC interface; Hub's interface rules: GND, VCC, signal 1 and signal 2; Two IIC interfaces; Pin Description: Sensor interface rules: GND, VCC, signal 1 and signal 2'' or GND, VCC, signal 1 and NC(empty) Hub interface rules: GND, VCC, signal 1 and signal 2'. Such as: Photosensitive sensor interface rules: GND, VCC, signal 1 and NC(empty). Since it is analog sensor, you can detect(A0-A7) by analog port. Seen from the picture, the hub can be connected to the location of 10, 11 and 12, and the corresponding pins areA6,A2 and A0. Since the temperature and humidity sensor uses IIC interface, we can connect it to "1" or "2". Document Development Stack with Microduino core modules and have an external connection with Microduino sensors. Select the right interface according to different sensors. Sensors adopting analog port: Microduino-Sound,[[Microduino-Light],Microduino-Joystick,Microduino-Moisture,Microduino-Water line mCookie-OLED,Microduino-Temp&Hum (Need to choose IIC interface.) Project Purchase History Pictures Video