Difference between revisions of "MCookie-OLED"

From Microduino Wiki
Jump to: navigation, search
(Features)
(Specification)
Line 24: Line 24:
 
==Specification==
 
==Specification==
 
*Resolution: 128x64;
 
*Resolution: 128x64;
 +
*Size of the screen: 0.96 cun;
 
*Interface:  IIC communication;
 
*Interface:  IIC communication;
 
*Voltage: 3.3V.
 
*Voltage: 3.3V.

Revision as of 06:56, 25 August 2016

Language: English  • 中文
Microduino-OLED

mCookie-OLED is based on SSD1306 0.96-inch 128*64 OLED display module, adopting the I2C interface and communicating with the core module by connecting to IIC interface of mCookie-Hub.






Features

  • glow actively, own a wide view and need no backlight;
  • Low driving voltage and power consumption;
  • Communicate in a way of I2C and save IO interfaces,widely used;
  • Small, cheap, stackable and open.

Specification

  • Resolution: 128x64;
  • Size of the screen: 0.96 cun;
  • Interface: IIC communication;
  • Voltage: 3.3V.
MCookie OLED-Pinout-1Big1.jpg

Document

Development

For the development, it need to be supported by _01_Microduino_OLED_U8glib library and check the library file here: (Installation Address)\Microduino-IDE\hardware\Microduino\avr\libraries

Microduino-libraries.jpg
Board
  • Open IDE and find "_01_Microduino_OLED_U8glib " examples under " File->Examples ".
_01_Microduino_OLED_U8glib

Project

u8glib Library Program Examples

  • Open Arduino IDE, click "HelloWorld"under " File->Examples->_01_Microduino_OLED_U8glib " and open program examples.
OLED- 01 Microduino OLED U8glib.jpg
  • Download after compiling and you'll see "HelloWorld!" on the screen.
  • Display character/variable:
    • Use u8g.print(xx) function just the same way like Serial.print(xx).
  • Change font:
    • Use u8g.setFont (xx) function to change the font, parentheses "xx" can be replaced by the corresponding font library name (you can search font library in u8g.h within U8glib \utility folder);
    • Large font is recommended for u8g_font_7x13, middle font for u8g_font_fixed_v0r and small font for u8g_font_chikitar;
  • Change coordinates:
    • Use u8g.setPrintPos (x, y) function to change the display of coordinates
  • Screen Rotation:
    • Post u8g.setRot180() in void setup() function, the screen will be flipped to 180-degree, you also can change 180 to 90,270;

Users can open other program examples and see the result. Other Projects: OLED Application

F&Q

  • What is the voltage of the power supply?
    • 3.3V。

Purchase

mCookie-OLED-Front
mCookie-OLED-Back

Video