Difference between revisions of "Motion (use with mDesigner)"

From Microduino Wiki
Jump to: navigation, search
(Compatible Pins)
(Compatible Pins)
Line 96: Line 96:
 
| '''Pin I2C'''
 
| '''Pin I2C'''
 
| style='background: #EAFAF1' | Yes
 
| style='background: #EAFAF1' | Yes
| Any I2C / IIC.
+
| Any I2C / IIC pin.
 
|}
 
|}
  

Revision as of 22:06, 28 June 2018

The motion sensor is a 3-axis gyroscope and 3-axis accelerometer. It is capable of detecting the angle and angular rate in the yaw, pitch, and roll axes (aircraft principal axes). Support for this module is found in mDesigner.

Note:
This module has a similar name to a Microduino / mCookie Motion module. They are NOT the same modules.
mDesigner does not support the Microduino / mCookie Motion module.

Compatible Pins

The following pins on the Hub or mCenter+'s Hub support this module:

Hub I2C Pins.png
Pin Name Compatibility Notes
Pin 0 No
Pin 1 No
Pin 2 No
Pin 3 No
Pin 4 No
Pin 5 No
Pin 6 No
Pin 7 No
Pin 8 No
Pin 9 No
Pin 10 No
Pin 11 No
Pin 12 No
Pin 13 No
Pin A0 No
Pin A1 No
Pin A2 No
Pin A3 No
Pin A6 No
Pin A7 No
Pin I2C Yes Any I2C / IIC pin.