Lesson 31--Static Display of Chinese Characters on the 16*16 Lattice
Language: | English • 中文 |
---|
ContentsObjectiveDesigned for LM-2256 series 16 *16 dot matrix, its size is 40.46*40.46*5mm. The size of each LED lamp is 2.0mm. Using four 74ls595 chips to control it, so you only need three pins to control 256 lights, which is enough to show a Chinese character not only just simple letters or numbers. This experiment combines Minroduino modules and the lattice, making it beautiful and compact. Equipment
DocumentLM-2256 Series 16 *16 matrix displays:File:.led 16 16.zip Features
DebugWelding circuitStep 1: Cut pegboard; Step 2: Design the position of Microduino base plate, then Welding Microduino base plate; Step 3: Fix the pegboard and lattice, and then plus studs for fixed; Step 4: Welding control pin;
Program
Step 1: Download test program, and then open it; Step 2: Compile it and then select the board to download, after download, you can see a Chinese character "Ya" (雅); Step 3: Change the font; Note:Change the modulus method to:Determinant, yang code, reverse. After finished, download directly. Detailed information, please refer to :http://www.microduino.cc/wiki/index.php?title=%E7%AC%AC%E4%BA%8C%E8%AF%BE--Microduino_OLED%E4%BD%BF%E7%94%A8/zh ResultThrough the test, it can display a Chinese character statically, and each LED light's brightness is uniform, and beautiful. ExtensionIn this experiment, we used Microduino-Core and Microduino Ft232R, thickness is a little big。If use the Microduino-32U4 (Instead Microduino-Core and Microduino Ft232R), the thickness will be decreased. Issue need to pay attention
Video |