Single-color LED

Case 1：Stars Lamps Outline Lit a lamp through the graphical. Bill of Materials Module Module Number Function mCookie-CoreUSB 1 Core board mCookie-Hub 1 Sensor adapter Sensor-LED 1 Single-color LED Other equipment USB cable*1 Sensor cable*1 600px Building hardware Setup 1: Connect the interface on the back of the ColorLED with the digital interface (4) of Hub to be the pin that control the LED, and users can change it freely. 600px Setup 2: Connect CoreUSB, Hub, and the single-color LED together, and connect them to the computer with USB cable. 600px Mixly Programming Step 1: Open the Mixly software, and drag the at the "number output" module in "input/output" tab control to theediting area. 800px Step 2: The introduction of the “number output” module. 600px Debugging Step1: Choose the board card（CoreUSB(32u4)[usb32u416m]） 800px Step2: Choose the COM port. 800px Step3: Upload the program. 800px After succeeding, the single-color LED lights with red color. The above is based on being debugged on the computer. After uploading successfully, the code is in the core, and can also use battery box to supply power. Connect the active battery box with the BM module. 600px