Download

• Download the latest Windows IDE:

https://www.microduino.cc/download

Installation

• Double click on the setup file Arduino IDE 1.X.X for Microduino.exe. Click [Next].

• Make sure Arduino IDE, USBTTL driver, and Core USB driver are all checked. Click [Next].

• Click [Browse...] if you would like to choose a different installation destination. Then click [Next] and [Install].

• After the Arduino IDE has been installed, a window for driver installation will appear. Click [Extract] and follow the instructions.

• Click [Finish] to complete the installation.

• After installation, there will be a shortcut to the Arduino IDE on your desktop.

Confirm Drivers Installed Successfully

• Connect Microduino-USBTTL to your computer. Verify that there are available Port options under Tools.

• Connect Microduino-CoreUSB or mCookie-CoreUSB to your computer. Verify that there are available Port options under Tools.

• Connect mCookie-Battery to your computer and stack a Core module onto it.

IMPORTANT: Ensure that mBattery is "ON" by pressing and holding the button. A red LED should be on, which indicates that power is being supplied to the Core modules.

• Verify that there are available Port options under Tools.

Arduino IDE Basics

Interface

• 【Verify】: Checks for errors in the code.

• 【Upload】: Uploads the program to a MCU.

• 【Serial Monitor】: Useful in debugging programs.

Tools

• 【Board】: Select the corresponding core module to which the program is being uploaded.

• 【Processor】: Select the corresponding processor.

• 【Port】: Select the common USB port.

The Board Types

Uploading Code

1. Select board type and processor.
2. Select the port.
3. Click upload.