Difference between revisions of "Sensor-IO Split"
From Microduino Wiki
(→Introduction of Pins) |
|||
| Line 12: | Line 12: | ||
==Introduction of Pins== | ==Introduction of Pins== | ||
| − | {{ | + | {{ST_Pinout |
| − | | | + | |st_name=IO Split |
| − | | | + | |pin3=GPIO-A |
| − | | | + | |pin4=GPIO-B |
}} | }} | ||
| Line 26: | Line 26: | ||
After connect the '''IN interface''' to one interface of SensorHub, the extended “A port” is corresponding to the “even pins” of SensorHub, and the “B interface” is corresponding to the “odd pins” of SensorHub. | After connect the '''IN interface''' to one interface of SensorHub, the extended “A port” is corresponding to the “even pins” of SensorHub, and the “B interface” is corresponding to the “odd pins” of SensorHub. | ||
| − | For example, connecting to the 6/7 pin of Hub, the corresponding pin of A is 6/7, and the corresponding pin of B is 7. | + | For example, connecting to the 6/7 pin of Hub, the corresponding pin of A is 6/7, and the corresponding pin of B is 7. |
==Document== | ==Document== | ||
Revision as of 23:42, 30 March 2017
| Language: | English • 中文 |
|---|
|
Sensor-IO-split can split a 4PIN interface into 2. Introduction of Pins
 After connect the IN interface to one interface of SensorHub, the extended “A port” is corresponding to the “even pins” of SensorHub, and the “B interface” is corresponding to the “odd pins” of SensorHub. For example, connecting to the 6/7 pin of Hub, the corresponding pin of A is 6/7, and the corresponding pin of B is 7. Document
ApplicationIt can be used to divide the two IO signals of one 4PIN port in Sensorhub into two 4PIN ports.
PurchaseGallery
|
