Getting started: Microduino IDE for Windows

Language:	English  • 中文

Download Download the latest Windows IDE: https://www.microduino.cc/download Installation Double click Install Microduino IDE.exe. Click【Next】. Make sure Arduino IDE, USBTTL driver, and Core USB driver are all checked. Click【Next】. Click【Browse...】if you would like to choose a different installation destination. Then click【Next】 and 【Install】. After the Arduino IDE has been installed, a window for driver installation will appear. Click【Extract】 and follow the instructions. Click【Finish】to complete the installation. After installation, there will be a shortcut to the Arduino IDE on your desktop. Confirm Drivers Installed Successfully Connect Microduino-USBTTL to your computer. Verify that there are available Port options under Tools. Connect Microduino-CoreUSB or mCookie-CoreUSB to your computer. Verify that there are available Port options under Tools. Connect mCookie-Battery to your computer. Verify that there are available Port options under Tools. IMPORTANT: Ensure that mBattery is "ON" by pressing and holding the button. A red LED should be on, which indicates that power is being supplied to the Core modules. Arduino IDE Basics Interface 【Verify】: Checks for errors in the code. 【Upload】: Uploads the program to a MCU. 【Serial Monitor】: Useful in debugging programs. Tools 【Board】: Select the corresponding core module to which the program is being uploaded. 【Processor】: Select the corresponding processor. 【Port】: Select the common USB port. The Board Types When using Microduino-Core, select the proper processor for your board: When using Microduino-Core+, select the proper processor for your board: When using Microduino-CoreUSB or mCookie-CoreUSB, select Microduino-CoreUSB: Uploading Code Select board type and processor. Select the port. Click upload.