Microduino Wifi gets weather information by the internet -203KIT

Language:	English  • 中文

Outline Project: Microduino-WIFI gets weather information by the internet. Purpose: Acquiring the weather information of a certain place by connecting Microduino-Wifi with the internet. The experiment adopts Microduino-Core+ and Microduino-Core. Difficulty: Elementary Time-consuming: 2-hour Maker: Microduino Studio-YLB

Bill of Material MICRODUINO 203KIT Module Number Function Microduino-Core+ 1 Core Microduino-USBTTL 1 Program download Microduino-WiFi 1 WiFi module Microduino-OLED 1 Info. Display Microduino-Weather 1 Sensor extension board (Please be noted that the Microduino-Weather module is not available at store currently. Instead, you can choose the relevant sensors at store www.microduino.cc/store. )

203KIT图片 Other equipment MicroUSB cable, OLED connector and breadboard as well as breadboard wire. Software Arduino IDE(version 1.0 and higher), Microduino test program (Arduino terminal) and download TI WIFI SMARTCINFIG from App Store;

Document

Debugging Step 1: Hardware buildup Stack all the modules together. In this experiment, we adopt Microduino extension board as the base, which is easy to connect and looks very beautiful.

203KIT图片

If you don’t have a Microduino extension, please adopt jumpers when connecting Microduino-OLED.

Step 2: Download example program. Start Arduino IDE, open Microduino test program and choose the board Microduino-Core+ (Atmega644P@16M,5V) and download;

Step 3: Open SMARTCINFIG application program. Connect IOS device to your router, open TI WIFI SMARTCINFIG and fill the router password;

Step 4: Connect IOS and Microduino Watch Microduino-OLED until it appears “Waiting for a SmartConfig connection (~60s) ...” and press “Start” of TI WIFI SMARTCINFIG and then wait for result.

SMARTCINFIG-Connection

Result You can see data result on Microduino-OLED after successful connection. Place Wind speed and direction Temperature and humidity Visibility Time acquisition

cc3000-data

Note Adopt Microduino-Core+ for debugging in the example. You may meet “connection timeout” or “fail to acquire”, just restart please.