Microduino-Lantern

Language:	English  • 中文

Microduino-Lantern Microduino-Lantern is one-wire-bus-control colored LED light, adopting WS2811 protocol with built-in IC chip control. Feature One-wire bus control and one I/O port control needed; Built-in IC control, capable of cascade control; Free color control (0-225); Specification 3.3V~5V operation voltage; Size: 5mm*5mm 1.27mm-pitch and 4pin interface; Three basic color to combine different color by adjusting from 0 to 255; File:Microduino-Lantern rule1.jpg 600px Document Schematic：File:Microduino Pulse.Zip Development You can select the color of the LED light by checking the corresponding color code online. Some are hexadecimal code value, which can be transferred to decimal value. Application Hardware needed:Microduino-Core, Microduino-USBTTL, Microduino-Sensorhub, dupont line and USB cable; Software: Make sure you build Microduino IDE or you can refer to Microduino Getting start You’ll need _99_LCD_NeoPixel library. Download here: https://github.com/wasdpkj/libraries/tree/master/_99_LCD_NeoPixel Stack all modules and connect the “IN” on the back of WS2812 to a digital port (D6) of Sensorhub via dupont line. Open “strandtext” in the library and change the “60” of “Adafruit_NeoPixel strip = Adafruit_NeoPixel(60, PIN, NEO_GRB + NEO_KHZ800)” to “1”, which is the light number you want to control. Here we adopt D6 pin, which you can also change. Choose the right board after changing and then download after compiling. You can see cool color experience after the download. Purchase History Picture Front Microduino-Cube-Station Front Back Microduino-Cube-Station Back