Microduino-Bright LED

Language:	English  • 中文

Microduino-BRIGHT LED Sensor Microduino-BRIGHT LED Sensor owns a size of 5mm*5mm. Feature Control the lightness of LED via PWM Small size and easy installation Specification 5V operation voltage Size: 20.32*20.32mm； 1.27mm-pitch and 4pin interface File:Microduino-BRIGHT LED Sensor rule1.jpg 600px File:Microduino-BRIGHT LED Sensor rule2.jpg 600px Document Schematic：File:Microduino BRIGHT LED.Zip Development The operation voltage of Microduino-BRIGHT LED Sensor is 5V. It can generally be controlled by digital port drive or by PWM. Each LED owns current-limiting resistance, which can avoid burning due to high electricity current. Application Hardware needed: Microduino-Core, Microduino-USBTTL, USB cable and dupont line; Stack all the modules and connect with dupont line: Connect VCC of BRIGHT LED to the 5V interface of Core, GND to GND, IN to D13. (You can refer to pin description picture above.) Open Arduino IDE, select File→Examples→Basics→Blink example and choose the right board, then download after compiling. You can see BRIGHT LED blink one time per second after the download. As for PWM control, you can refer to: Lesson 6 --The Program PWM control of LED brightness --Breathing light Purchase History Pictures Front Microduino-Cube-Station Front Back Microduino-Cube-Station Back