Difference between revisions of "S4A Scratch Getting Started"

Latest revision as of 09:36, 13 September 2016

Arduino IDE-Programming software, which can be downloaded here Microduino Getting started

Software communication support package, needed to be downloaded and then installed to the core board of Microduino. Local download: File:S4AFirmware15.zip

Users can also use mCookie-CoreUSB, Microduino-CoreUSB or Microduino-Core+ to debug. Please select the right board from Tools->Board->XXX in Arduino IDE when you download the program.

Build Microduino development environment. Please refer to: Microduino Getting started

Stack Microduino-Core and MicroduinoUSBTTL, then connect to the PC through USB cable.

Open "S4AFirmware15" with Arduino IDE, choose the right board and port and then download the program to Microduino-Core.

Install S4A programming software, open it when connecting automatically to Microduino boards, and you can see the connected port number and monitor analog port data.

@@ Line 25: / Line 25: @@
 **PC
 **USB cable
+'''Users can also use [[mCookie-CoreUSB]], [[Microduino-CoreUSB]] or [[Microduino-Core+]] to debug. Please select the right board from Tools->Board->XXX in Arduino IDE when you download the program.
 ||
@@ Line 38: / Line 40: @@
 *Stack Microduino-Core and MicroduinoUSBTTL, then connect to the PC through USB cable.
-* Open “S4AFirmware15” with Arduino IDE, choose the right board and port and then download the program to Microduino-Core.
+* Open "S4AFirmware15" with Arduino IDE, choose the right board and port and then download the program to Microduino-Core.
 ||