Difference between revisions of "Sensor-Color Detector"

From Microduino Wiki
Jump to: navigation, search
(Application)
(Introduction of Sensor Pins)
 
(One intermediate revision by one other user not shown)
Line 15: Line 15:
  
 
==Introduction of Sensor Pins==
 
==Introduction of Sensor Pins==
{{Sensor_explain
+
{{ST_Pinout
|nameA=[[Sensor-Color Detector]]
+
|st_name=Color Detector Sensor
|modeA=SDA(IIC communication)
+
|pin3=IIC SDA
|modeB=SCL(IIC communication)
+
|pin4=IIC SCL
 
}}
 
}}
  
Line 79: Line 79:
 
==History==
 
==History==
  
==Pictures==
+
==Gallery==
  
 
*Front  
 
*Front  
[[file: Microduino-Color-Detector -F.JPG|thumb|600px|center|Microduino-Temp&Hum Front]]
+
[[file: Microduino-Color-Detector1 -F.JPG|thumb|600px|center|Sensor-Temp&Hum Front]]
 
*Back  
 
*Back  
[[file: Microduino-Color-Detector -b.JPG|thumb|600px|center|Microduino-Temp&Hum Back]]
+
[[file: Microduino-Color-Detector1 -b.JPG|thumb|600px|center|Sensor-Temp&Hum Back]]
 
|}
 
|}

Latest revision as of 23:12, 30 March 2017

Language: English  • 中文
Microduino-ColorDetector

The product number of Sensor-Color Detector is: MSDT51

Microduino-Color detector is a color detection sensor.

This module adopts TCS3414CS color chip. Based on 8×2 filtered photodiode and 16-bit analog-digital converter, you can measure light or light reflection on the surface of an object to acquire color value.



Introduction of Sensor Pins

Sensor backpin.png

Color Detector Sensor
General Pin Out Sensor / Trinket's Pin Out
PIN1 (GND) GND
PIN2 (VCC) VCC
PIN3 (SIGNAL-A) IIC SDA
PIN4 (SIGNAL-B) IIC SCL
  • General Pin Out is the standard pin out of a Sensor / Trinket connector.
  • Sensor / Trinket's Pin Out is this specific Sensor / Trinket's wiring in relation to the General Pin Out.
  • SIGNAL-A / SIGNAL-B are signals that could be digital input, digital output, analog input or analog output. Or special signals such as serial communication (SoftwareSerial, IIC (I2C), etc) or other special signals.
  • Not Connected refers to the Pin not being used for this particular Sensor / Trinket.
  • Read more about the hub module.

Features

  • With high accuracy and sensitivity;
  • With low consumption, long service life and high stability;
  • Small and easy to install.

Specification

  • Sensor voltage
    • 3.3V~5V working voltage
  • Size of the sensor
    • Sensor of the board: 23.5mm*13mm
    • 1.27mm-spacing 4Pin interface connected to sensorhub
    • The CAD drawing of the sensor: File:Sensor CAD.zip
  • Technical parameter
    • Working temperature: -40 ~ 85 °C
  • Connection
  • This sensor can be connected to pin I2C of core.

Document

Development

Program Download

Programming

  • Follow the Software Getting Started Guide.
  • Select the Board, Processor and Port.
  • Click [File]->[Open], browse to the project program address, and click "Sensor-Color Detector Test.ino" to open the program.
  • After confirming all these items are correct, click "→" to download the program to the development board.

Hardware Setup

  • Referring to the following diagram, connect the Sensor_Color_detector to IIC interface of Microduino-Sensorhub.


Microduino-sensorhub I2C.JPG


Result

  • After download, open the serial monitor.
  • Putting the sensor toward different colors, the serial monitor will print out the current RGB value in cycle.

Application

Suitable for environment color detection and so on.


Project

Purchase

History

Gallery

  • Front
  • Back
Retrieved from "https://wiki.microduinoinc.com/index.php?title=Sensor-Color_Detector&oldid=12708"